… high strength with excellent ductility and good weldabillity. Preheat and interpass temperature > 200°C …  1.7218, 1.7225 25 CD4, 13 …

… copper coated core wire and a powerful arc at very low amps. Preheating is normally done to slow down the cooling speed, in case you …

… Stable, mechanical property values of the weld metal also at high heat input up to 18 kJ/cm. … Reh < 690 MPa Iso 15608: 2.2 u 3.2 ( 460 < …

… slag in combination with very low hydrogen content. Suitable for heat treatment. Step cooling is possible. High reserve of toughness and …

… and DC+ with a recovery of 200% for excellent deposit performance. (Preheating is not required)Equivalent in FCAW: OA 59, OA 60 Mo, OA 61, OA …

… was originally targeted for use as A-USC boiler tubes in the superheater sections of these plants but was then adapted for application as …

… improved deposition rate. To obtain optimum mechanical properties the heat input should be kept below 15 kJ/cm and interpass temperature …

… content (≈2 ml/100gr) even after many years of storage. Due to less preheating required huge savings can be made and these type of wires offer …

… with lower silver containing Phosphor-Copper Alloys. Ideal where the heat feeding is critical because of its low operating temperature.  …

… wires. Excellent weld metal quality and X-ray soundness. Post weld heat treatment (PWHT) can be applied without any problems. … 19% Cr / …