CEWELD E DUR 400 KB

<

PRODUCT SPECIFICATIONS
PACKAGING

Type

Basic coated electrode for rebuilding machine parts and buffer layers.

classification

EN ISO

14700: E Fe1

DIN

8555: E 1-UM-400-P

Applications

Hardfacing, rebuilding, overlays, machine parts, wheels, buffer layers, etc.

Type

Basic coated electrode for rebuilding machine parts and buffer layers.

Applications

Hardfacing, rebuilding, overlays, machine parts, wheels, buffer layers, etc.

Properties

Outstanding alloy against high impact combined with abrasion including metal to metal friction. The weld deposit of Dur E 400Kb is an exceptional easy to apply alloy without any risk for cracks and can also be applied on austenitic manganese steels. The weld deposit is machinable with tungsten tool tips. Very good weld deposit appearance and outstanding welding properties on both AC and DC+. Preheating is not required.

Classification

EN ISO

14700: E Fe1

DIN

8555: E 1-UM-400-P

Suitable for

Rebuilding worn machine parts, Stone crushers, Hammers, Gears, Cams etc.

Welding positions

Redrying

300°C / 2 hr

Analysis

C	Mn	Cr	Ni	Mo	Nb	V	Fe	W	Co	Cu	Al	Si	Ti	B	N
0.1	0.85	3					Rem.

Mechanical Properties

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded				400 HB

product sheet

declaration of performance

declaration of conformity

Ask quotation

MSDS

E DUR 400 Kbstick welding electrode for rebuilding-hardfacing

E DUR 400 Kbstick welding electrode for rebuilding-hardfacing

Packing info

E DUR 400 KB 3,2 x 350mm
Packaging	KG/unit	EanCode
Can	2,8	8720663401618

E DUR 400 KB 4,0 x 450mm
Packaging	KG/unit	EanCode
Can	3,2	8720663401625

product sheet

Ask quotation

MSDS

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.