https://pro.cdn.certilas.com/backoffice_media/19279/Alloy-C-276-Hasteloy-Mig-welding-wire.mp4

CEWELD Alloy C-276
Is an equivalent for Lincoln LNT/LNM NiCroMo 60/16

Lincoln LNT/LNM NiCroMo 60/16

Brand

Lincoln Electric

Ceweld product

Type

Filler metal for welding similar NiCrMo C276 alloys.

classification

AWS

A 5.14: ERNiCrMo-4

EN ISO

18274: S Ni 6276 (NiCr15Mo16Fe6W4)

W.Nr.

2.4887

Applications

CEWELD® Alloy C276 is used for welding materials of similar composition. This low carbon nickel-chromium-molybdenum filler metal can also be used for dissimilar welding between nickel base alloys and stainless steels, as well as for surfacing and cladding on low alloyed steels.

Type

Filler metal for welding similar NiCrMo C276 alloys.

Applications

CEWELD® Alloy C276 is used for welding materials of similar composition. This low carbon nickel-chromium-molybdenum filler metal can also be used for dissimilar welding between nickel base alloys and stainless steels, as well as for surfacing and cladding on low alloyed steels.

Properties

Due to high molybdenum content this alloy offers excellent resistance too stress & corrosion cracking, pitting and crevice corrosion. High mechanical properties with excellent weldability.

Classification

AWS

A 5.14: ERNiCrMo-4

EN ISO

18274: S Ni 6276 (NiCr15Mo16Fe6W4)

F-nr

43

FM

6

W.Nr.

2.4887

Suitable for

N10276, 2.4819, NiMo16Cr15W, alloy C4, Hastelloy C276

Welding positions

Redrying

Not required

Gas acc. EN ISO 14175

I1

Analysis

C	Si	Mn	P	S	Cr	Ni	Mo	Nb	Ti	V	Fe	W	Co	Cu	Al	Nb+Ta
0.01	0.07	0.4	0.02	0.01	15.5	70	16			0.2	5	3.5	1	0.2

Mechanical Properties

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Impact Energy (J) ISO-V	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	RT	Hardness
As Welded	470	740	32	100	HRc

product sheet

declaration of performance

declaration of conformity

Ask quotation

MSDS

product sheet

Ask quotation

MSDS

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.