… better galling resistance. Normally to obtain adequate ductility, preheat and post-weld heat-treatment are required . AA 410 is a …

… cobalt-based alloys, allowing multiple layer build-ups with no pre-heating needed. -ULTIMET wire produces deposits wich harden quickly …

… suited for welding jobs at poorly accessible points and badly prepared seams. CEWELD® E 6013 S can be sued in all positions, in …

… μm FSSS Apparent density (ISO 3923-2): 4.2-5.5 g/cm³ Particle shape: preponderantly spherical Particle size: 45/20 μm … Ideal for use in a …

… in thick highly restrained weldments, since the possibility of premature service failure by intergranular HAZ cracking is reduced by …

… in case off multi-layer welding. The weld metal will show no undercut !Preheating is normally done to slow down the cooling speed, in case you …

… cleaned prior to welding. Heavy parts and thicker plates should be preheated (150 °C), prior to welding. … Al99,0 Al.99,5 Al.99,7 E-Al., …

… resistance and good resistance to carburization and oxidation. No preheating or post heat treatment is necessary. Pay attention to low …

… recovery type for economic production of creep resistant steels and pressure-hydrogen-resistant 2¼Cr1Mo-steels. … 2,25% Cr, 1% Mo  1.7015, …

… hand welding. Excellent against pitting and stress corrosion. The PREN above 35 weldmetal offers outstanding resistance against pitting. …