Whether it concerns solid or flux-cored welding wires, Tig rods or sub arc wires and powders and or brazing alloys or even thermal spray wires, you have come to the right place. With no less than 2,000 tons of stock and more than 500 different alloys, we are ready to serve you.
In our Product Database you can find all our products by searching on Category, product name, Equivalent, EN, AWS, W.Nr or material to be welded.
Equivalent search is the fastest way to find your CEWELD equivalent of most common brands.
Copper coated SAW wire best in combination with flux FL 155
High Manganese and Silicon content for improved de-oxidation and strength, excellent wetting for increased welding speed with corresponding flux. Suitable fluxes are depending on the weld metal requirements, in most cases CEWELD® FL 155 gives excellent results.
Submerged arc welding (5% chromium wire) for high temperature creep resistant steels. Flux CEWELD® FL 880
Sub arc filler metal specifically intended for high integrity structural service at elevated temperature so the minor alloy additions responsible for its creep strength are kept above the minimum considered necessary to ensure satisfactory performance. SA 90S-B9 is best to be used with FL 880 high basic agglomerated flux to obtain optimum creep properties.
CEWELD SA 309L shows high mechanical properties and very good weldability, suitable for operating temperatures up to 300°C. For welding in combination with CEWELD FL 838 and CEWELD FL 880 welding fluxes.
Austenitic, non magnetic stainless steel alloy with high mechanical properties and excellent weldability, corrosion resistance is better than AISI 316 due to the high Mo. content and also offers excellent corrosion resistance against delude hot acids. Suitable for use up to 400°C. SA 317L is best to be used in combination with FL 838
Submerged arc welding wire for high temperature creep resistant 2,45%Cr 1,0%Mo ferritic steel. These steels are used for creep resisting applications up to ~550°C. The wire has low levels of tramp elements (e.g. Sn, As, Sb and P) providing a low Bruscato Factor (X< 10 ppm) for temper embrittlement resistant applications. Recommended flux: FL 155
CEWELD SA 307 has a medium strength with very high resistance to cracking due to its high elongation. We recommend CEWELD FL 880 or FL 838 as welding flux
CEWELD SA 308L has good general corrosion resistance. The alloy has a low carbon content, making it particularly recommended where there is a risk of intergranular corrosion. Best to be used with our agglomerated flux FL 8111, FL 838 or fused flux FL 880
CEWELD SA 309LMo is a solid wire for SAW which operates with very stable, spatter free arcs. This wire deposits low carbon weld metal of about 23%Cr-13%Ni-2.3%Mo.
Cladding on low alloyed steels,the weld metal already achieves approximately the composition of ASTM 316 in the 1st layer.
For welding in combination with CEWELD FL 838 and CEWELD FL 880 welding fluxes.