E DUR 60 Kb

type 
Basic coated, alloyed Cr-Mo-V electrode
applications 
Hardfacing against high impact combined with strong abrasion wear.
Properties 

Outstanding alloy against high impact combined with abrasion including metal into metal friction. The weld deposit of CEWELD E Dur 60 Kb is one of the most universal alloys in hardfacing applications and can also be applied
on austenitic manganese steels. Very good weld deposit appearance and outstanding welding properties on both AC and DC+. Preheating is not required.

classification
AWS 
A 5.13:~E Fe3
F-No. 71
EN ISO 
14700: E Fe8
DIN: W.Nr. 
1.4718
DIN 
8555: E6-UM-60
Suitable for 

Mixing arms, cold cutting tools, hammers, rolls, loaders, buckets, pumps, hardfacing on austenitic manganese steel, rebuilding knives

approvals 
CE approved
welding positions: 
weld metal analysis %

C

Cr

Mn

Mo

V

Fe

0.5-0.8

7-10

0.5-0.7

0.5-1.0

1.0-1.2

rem

mechanical properties

Heat

Hardness

treatment

RT

AW

54-60 HRc

AW: as welded
redrying temperature 
300°C/2hr
welding parameters / packing

Welding Parameters

Packing

D (mm)

Length (mm)

Current (A)

kg / can

kg / 6 pack

kg / 1000

2.5

350

80-120

3.00

18.00

3.2

450

100-160

3.30

19.80

4.0

450

160-220

3.50

21.00

5.0

450

190-260

3.30

18.00

Equivalents
GMAW - CEWELD MA 600

Disclaimer: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.