1. … The weld deposit is scale-resistant up to approx. 800°C in normal atmosphere and oxidizing gases. The weld … is capable of taking a high polish.Structure: Austenite with delta ferrite UNS 34780 … ISO 15608: 8.1 / TüV Groupe 29 (+22+21) / E347, 19 …
  2. … grain size of tungsten particles you wish to use for your hardfacing applications. With over 2400 HV hardness and such a extreme rough surface amazing results can be obtained on many different applications. With the standard well known Mig-process Tungsten …
  3. … a buffer layer for all other spraying alloys. Hardness, coating macro: approximately HRc 22. Maximum working temperature: approximately 850 °C … Shafts, Clutches, Gliding surfaces, Valves, Bond …
  4. … 1 or 2 layers should not be deposited. Hardness reduction at 400°C app. 4%, at 650°C app. 10%. A Buffer layer with OA 4370 or OA MnCr is recommended in case …
  5. … than the standard L-type. The microstructure is austenite with approx. 5-10% ferrite. … ISO 15608: 8.1  Austenit ≤ 19 % Cr 9 % Ni, TÜV 1000: Gr. …
  6. … fine grain steels for low temperature requirements down to -60°C in apparatus, construction and offshore applications. …   Materials shipbuilding Unalloyed steels boiler steels …
  7. … The weld deposit is scale-resistant up to approx. 800°C in normal atmosphere and oxidizing gases. The weld … is capable of taking a high polish. Structure: Austenite with delta ferrite … ISO 15608: 8.1 / TüV Groupe 29 (+22+21) / E347, 19 9 Nb, …
  8. … cast carbide will guaranty a long life for several wear applications. Best to be used with shielding gas M13 (Argon with 1% Oxygen) approx. 15 litres per minute. … Rebuilding of stabilisers and other …
  9. … SA 347 strip is trip s stainless steel strip for cladding overlay applications. Latest generation clean melting quality guarantees optimum metallurgical quality and attractive weld appeal. Combined with our high basic electro slag flux FL 830 ESHC …
  10. … 1,0%Mo ferritic steel. These steels are used for creep resisting applications up to ~550°C.  The wire has low levels of tramp elements … a low Bruscato Factor (X< 10 ppm) for temper embrittlement resistant applications. Recommended flux: FL 155 … 2,25% Cr, 1% Mo  1.7015, …