<
  • PRODUCT SPECIFICATIONS
  • PACKAGING
Type
Crushed Tungsten / Cobalt particles for the MAG carbide feeder system.
Applications

Dur WC 3000 is used in combination with the MAG proces to develope a sharp and rough surface on cutting tools for steel and or concrete sawing and or crushing applications. These particles can be used in combination with medium hard, extra hard and corrosion resistant filler metals that fits the application.

Type
Crushed Tungsten / Cobalt particles for the MAG carbide feeder system.
Applications

Dur WC 3000 is used in combination with the MAG proces to develope a sharp and rough surface on cutting tools for steel and or concrete sawing and or crushing applications. These particles can be used in combination with medium hard, extra hard and corrosion resistant filler metals that fits the application.

Properties

The particles should fall before the solidification in the molten weldpool and become part of the weld deposit, Metal core fluxcored wires are recommended in spray arc to obtain the best results. The torch angle should be in trailing position at about 80 degrees towards the work piece.

Suitable for

concrete drilling, earth moving tools, recycling bars and hammers, cutting applications, sawing steel and concrete, deepsea wrack sawing, mixing paddles, scraper blades, mining etc....

Welding positions
PA
Redrying
Not required
product sheet
Ask quotation
tungsten carbide grits for hardfacing against wear
Packing info
DUR WC 3000 0,5-1,0mm
Packaging KG/unit EanCode
5 8720663402912
DUR WC 3000 1,0-2,0mm
Packaging KG/unit EanCode
5 8720663402929
DUR WC 3000 2,0-4,0mm
Packaging KG/unit EanCode
5 8720663402936
product sheet
Ask quotation