CEWELD 4009 Ti

<

PRODUCT SPECIFICATIONS
PACKAGING

Type

Basic coated electrode with approximately 13% Chromium

classification

AWS

A 5.4: E 410-26

EN ISO

3581-A: E 13 B 42

W.Nr.

1.4009

Applications

CEWELD 4009 Ti can be used for welding martensitic-ferritic steels and cast steel. Predominantly for build-ups, corrosion-resistant and wear-resistant layers. Preferred applications are sealing surfaces on gas, water and steam fittings at operating temperatures of up to 450ºC.

Type

Basic coated electrode with approximately 13% Chromium

Applications

CEWELD 4009 Ti can be used for welding martensitic-ferritic steels and cast steel. Predominantly for build-ups, corrosion-resistant and wear-resistant layers. Preferred applications are sealing surfaces on gas, water and steam fittings at operating temperatures of up to 450ºC.

Properties

CEWELD® E 4009 Ti can be used for a working temperature of up to 450ºC. The recommended preheat temperature is 200ºC - 300°C unless the base material requires a higher preheat temperature. Use DC+ polarity and min 2 layers are required.
A tempering of 700 - 750°C is possible if required.

Classification

AWS

A 5.4: E 410-26

EN ISO

3581-A: E 13 B 42

F-nr

1

FM

5

W.Nr.

1.4009

Suitable for

1.4000, 1.4001, 1.4002, 1.4003, 1.4006, 1.4008, 1.4021, 1.4024,

X6Cr13, X6CrAl13, X10Cr13, X15Cr13, X20Cr13, G-X10Cr13

AISI 410, 420

Approvals

CE

Welding positions

Redrying

300°C / 2 hr

Analysis

C	Si	Mn	P	S	Cr	Ni	Mo	Nb	N	Cu	Ta	Nb+Ta	W
0.1	0.6	0.7			13	0.2	0.5

Mechanical Properties

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
725°C- 755°C 1h	500	650	21	180 HB
As Welded	550	800	10	300 HV

product sheet

declaration of performance

declaration of conformity

Ask quotation

MSDS

13 percent chromium electrode for welding martensitic steels

13 percent chromium electrode for welding martensitic steels

Packing info

4009 Ti 2,5 x 300mm
Packaging	KG/unit	EanCode
Can	2,5	8720663400710

4009 Ti 3,2 x 350mm
Packaging	KG/unit	EanCode
Can	2,6	8720663400727

4009 Ti 4,0 x 350mm
Packaging	KG/unit	EanCode
Can	2,6	8720663400734

product sheet

Ask quotation

MSDS

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.