… feather. The deposit is not mashinable or forgeable. Only grinding with diamond tools is possible.Dur R (Ni) is available as a 500 mm … cast iron or Mn-steel. The main applications are hardfacing and rebuilding of stabilisers and other oilfield tools where maximum protection …

… analysis. Best to be used with CEWELD® FL 915 or CEWELD® FL 8111 welding flux.The deposit is resistant to seawater, thin acids and scale …

… Excellent welding properties. High world wide excepted quality with controlled cast … service at temperatures up to 500°C.  … Typ 0,5Mo  ≤ 460 MPa,  ISO 15608: 1.2, 1.3 1.5415, 1.0481, 1.0482 15 Mo3, 16Mo3 , 20MnMoNi4-5, …

… Suitable for downhand butt- and fillet weld, smooth welding pool without spatter loss, easy slag release, very nice bead surface … Reh ≤ 420 MPa ISO 15608: 1.1, 1.2 1.0426, 1.0429, 1.0481, 1.0484, 1.0409, 1.0421, …

… Cladding on low alloyed steels in case a 18/8/2 (AISI 316) CrNiMo layer is required in the first layer. … Strip cladding on low alloyed steels in case a 18/8/2 CrNiMo (AISI 316) layer is …

… of intergranular corrosion. The higher silicon content improves the welding properties such as wetting and results in a bright seam. … ISO 15608: 8.1  Austenit ≤ 19 % Cr , TÜV 1000: Gr. 21-30,  1.4583, …

… Special alloyed copper rods for Tig welding. The weld metal is a Cu-Al bronze. Sound, pore free deposits. … … and or bronze. Excellent for metal spraying. Ship propellers, shipbuilding, pump building, shafts, guide grooves etc, UNS : C 60600 - C 61600 - C 68700, DIN …

… basis for hard deposits on parts subject to abrasion. Excellent bonding strength. Is an 1.3505 Steel type specially modified for spraying. …

… with sintered Components Carbide size: 2,5 μm FSSS Density (ISO3923-2): 4.2-5.5 g/cm³ (dependent on designated size) Particle …

… thank to the Nb carbides. The choice for the buffer layer is depending on the base metal and not always necessary. If applied correctly …