… feather. The deposit is not mashinable or forgeable. Only grinding with diamond tools is possible.Dur R (Ni) is available as a 500 mm … cast iron or Mn-steel. The main applications are hardfacing and rebuilding of stabilisers and other oilfield tools where maximum protection …

… Suitable for downhand butt- and fillet weld, smooth welding pool without spatter loss, easy slag release, very nice bead surface … Reh ≤ 420 MPa ISO 15608: 1.1, 1.2 1.0426, 1.0429, 1.0481, 1.0484, 1.0409, 1.0421, …

… guarantees optimum metallurgical  quality, economic positional welding and attractive welder appeal.Very good resistance against pitting …

… Cladding on low alloyed steels in case a 18/8/2 (AISI 316) CrNiMo layer is required in the first layer. … Strip cladding on low alloyed steels in case a 18/8/2 CrNiMo (AISI 316) layer is …

… of intergranular corrosion. The higher silicon content improves the welding properties such as wetting and results in a bright seam. … ISO 15608: 8.1  Austenit ≤ 19 % Cr , TÜV 1000: Gr. 21-30,  1.4583, …

… analysis. Best to be used with CEWELD® FL 915 or CEWELD® FL 8111 welding flux.The deposit is resistant to seawater, thin acids and scale …

… Excellent welding properties. High world wide excepted quality with controlled cast …

… basis for hard deposits on parts subject to abrasion. Excellent bonding strength. Is an 1.3505 Steel type specially modified for spraying. …

… thank to the Nb carbides. The choice for the buffer layer is depending on the base metal and not always necessary. If applied correctly …

… has increased resistance to lowangle erosion, abrasion, and severe sliding wear whilst retaining reasonable impact and cavitation resistance. …