1. … Austenitic deposit with strain hardening properties and no limits in the number of layers. The deposit is non magnetic and can not be flame cut. Extreme resistance to heavy impact loads. … properties. This alloy should be applied at highest impact and pressure loads applications. Best to be used with welding flux FL 915 … …
  2. … Smooth drop transfer and more stable arc compare to solid wires. High productivity and weldabillity, better … hand welding. Excellent against pitting and stress corrosion. The PREN above 35 weldmetal offers outstanding resistance against pitting. … ISO 15608: (8.1), 10.1-10.2,  TÜV 1000: Gr. 31, DUPLEX 2209, 22%Cr 9%Ni 3%Mo  …
  3. … This alloy offers excellent weldability when properly cleaned prior to welding. Heavy parts and thicker plates should be preheated (150°C), prior to welding The alloy shows good … 3.3315, 3.3535, 3.3206, 3.3541, EN AW 5005A, EN AW 5754, EN AW 6060, EN AC 51100, EN AW 5454, EN AW 5251,   … AlMg 3 … A 5.10: ER5754 …
  4. … Excellent weldabillity and improved mechanical strength due to its high Nickel content. The weld deposit is … and cleaning method during production.  Thicker sections should be preheated (150°C) prior to welding. … Filler metal for welding …
  5. … The weld deposit offers good wear and corrosion resistance even in seawater. Welding instructions: - Preheating for sections >6 mm from 150 till 300 ºC is recommended. Use … Aluminium Bronze or Copper, etc. Mat.n: 2.0916, 2.0920, 2.0928, 2.0460, 2.0932  CuAl5, CuAl8, G-CuAl9,  CuZn20Al2, CuAl8Fe3,   UNS: C60600, …
  6. … This pure aluminum filler metal offers excellent weldability when properly cleaned prior to welding. Heavy parts and thicker plates should be preheated (150°C), prior to welding  … Cast aluminium special repairs, …
  7. Brand: Kobelco
    CEWELD Product: AA NiCro 625
    … PREMIARC … 44 … DW-N625P …
  8. … Due to the high resistance to cracking and toughness, all weld metal requires no buffer layer. Suited for wear parts subject to heavy pressure, impact and shock. The interpass temperature should be maximum …
  9. … The weld puddle is amazingly fast freezing and therefore especially preferred in vertical down position with high speed and deep … achieved on old and dirty or otherwise diluted plates. … Rp< 420 MPa (60ksi) ISO 15608: 1.1,1.2, (1.3) S235JR-S355JR, S235JO-S355JO, …
  10. … Very good abrasion resistance in combination with impact even at higher temperatures up to 550ºC. To much layers should be avoided, preheat is necessary to avoid cracking. A buffer layer with OA 4370 or …