… especially at high temperatures, due to its high Cr content. The alloy is fully austenitic and is therefore sensitive to hot cracking. … for use under intermittent oxidation depend on cycle frequency. This alloy can withstand relatively severe thermic shock, and is superior to …

… Mn, Ni, Cr and Mo alloyed basic electrode for welding low alloyed steels with tensile strength > 620 MPa. Crack resistant and …

… High deposition rate and excellent weldability on DC +. Stainless steel alloy for joining and cladding 17% Chromium alloys and cladding components where heat and corrosion resistance …

… Special alloy for welding aluminium-magnesium basis alloys with maximum 5% Mg. Zirconium acts as grain-refiner to improve … storage tanks, railways and automotive industry. … Aluminium alloys: AlMg4,5Mn, AlZnMgCu1,5, AlMg5, AlMg3, AlMg5, AlMg2Mn0.8, …

… construction, pressure pipe, turbine and boiler construction. The alloy is also used alloy is also used in the chemical and petrochemical industry. The low … insensitivity to temper embrittlement. … For similar 1.25%Cr-0.5%Mo-alloyed, heat-resistant, ferritic steels. 1.7335, 1.7242, 1.7337, …

… Higher temperature and scale resistance than standard (L) types. Alloy has a high carbon content which make this alloy suitable for applications used at higher temperatures. Best to be …

… Due to high molybdenum content this alloy offers excellent resistance to stress & corrosion cracking, … against pitting and crevice corrosion, dissimilar joint of nickel alloys and stainless steels, … NiCrMo-4 2.4819, 1.7752, 2 NiMo16Cr15W … B574, SB574, B575, SB575, B622  UNS N10276,  Hasteloy C276, NiCrMo alloys, Inconel Alloy C276, Nicrofer 5716MoW … AA C-276 … A 5.34: E …

… Thanks to its excellent weldability and good penetration this alloy is used mainly in construction and automotive industry. The … addition results in improved fluidity (wetting action), making the alloy the preferred choice of welders. The alloy is not sensitive to weld cracking and produces bright, almost …

… F is a flux-coated brazing rod (F). It is a universal silver brazing alloy without Cadmium with low operating temperature and high mechanical properties. Due to the addition of Sn. this alloy will show a bright looking joint and is more capillary then the standard silver brazing alloys. … Brazing: Steels, Cast iron, Copper, Copper alloys, Stainless …

… CEWELD 430 Ti is a 18%Cr alloy stabilized with Ti. This alloy has improved oxidation and corrosion resistance over an ER409 alloy. Single pass welds on light gage base metal or welds with preheat …